Barco STELLAR User And Service Manual page 30

2
18
Customized connector panel
Network or TS input
SPI transport stream input SPI IN
ASI transport stream input ASI A IN
V.35 input
Audio output
Audio ch. 1. Analog
stereo audio output
Audio ch. 2. Analog
stereo audio output
Audio ch. 1. Digital stereo
audio output
Audio ch. 2. Digital stereo
audio output and clock
input
Network or TS Output
ASI restamping output
SMPTE 310M output
Control, alarm and data
Auxiliary data on RS-232
Auxiliary data on RS-422
N x 64 kbit/s data
Contact control
RS-485 remote connector
Alarm relays
Control
RS-232 local connector
Text on the rear panel
A and B
←
OUT   IN
ASI B IN
→
IN   OUT
IN
OUT
Text on the rear panel
AUDIO OUT 1
L, R
AUDIO OUT 2
L, R
AUDIO OUT 1
AES/EBU
AUDIO OUT 2
AES/EBU, CLK
Text on the rear panel
ASI OUT 1 and 2
SMPTE 310M OUT
A and B
Text on the rear panel
AUX RS-232
AUX RS-422
N x 64 kbit/s OUT
CONTACT CONTROL
RS-485
ALARM
Text on the front panel
CONTROL
Connector type
2 x 25-pin sub-D female
2 x 2 BNC.
Two inputs with active
loop-through
2 x 25-pin sub-D female.
One input with active
loop-through.
Connector type
2 XLR female. The left
connector is shared with
the digital stereo output
2 XLR female.
The connectors are shared
with the digital stereo
output
1 XLR female
(left connector)
2 XLR female
Connector type
2 BNC
2 BNC
Connector type
9-pin sub-D female
9-pin sub-D female
9 pin sub-D female
9-pin sub-D female
9-pin sub-D male
15-pin HD sub-D female
Connector type
9-pin sub-D female