Barco STELLAR User And Service Manual page 49

System
These three keys give access to the following areas.
Key
Config
Status
Lock
Alarm This section features three LEDs indicating two types of alarms as well as "Receiving
Attention". Furthermore there is one key:
REC ATT
Local control port
The RS-232 port is used for connecting a PC to the S
Function
Configuration menu. The basic system
settings can be controlled here.
Viewing of Alarms.
When the S is controlled by an
TELLAR
external management system, for
example ROSA, the front panel is
locked. The "Lock" key unlocks the
front panel if the management system
approves this action. This menu is not
available yet meaning that the front
panel is always unlocked.
If you press this key the alarm is acknowledged. This key is also
used to set the S address in ROSA.
TELLAR
for local control.
TELLAR
Front panel sections
3
37