Setting Up The Descrambling - Barco STELLAR User And Service Manual

4
N

Setting up the descrambling

To set up the
descrambling
Note!
82

Setting up the descrambling

The input to the S may be scrambled by the encoder and has to be descram-
TELLAR
bled before it can be decoded.
Do as follows to set up the descrambling:
1. From the Codec Explorer right-click on the icon representing the incoming
data stream and select Descrambling.
2. Click Descrambling.
To descramble the transmitted data, the S
descrambling system. No encryption part is implemented and the descrambler is
BARCO defined.
3. Type in the descrambling key.
The scrambling key must consist of 8 hexadecimal characters and be exactly the
same in the P and the S
OLARIS
which is scrambled with the BARCO proprietary scrambler can only be descram-
bled with a BARCO S
TELLAR
4. Click Apply.
This display will be removed from the next version of the S
offers the BARCO proprietary
TELLAR
. Otherwise descrambling fails. A signal
TELLAR
.
TELLAR
device driver.