Pal-M Video Output - Barco STELLAR User And Service Manual

Video performance
N

PAL-M video output

Composite video
formats
Composite video output Number of outputs
3) Measured with a P
OLARIS
change rate
Burst amplitude variation
3)
Gain
Insertion gain
Level stability
Noise
Quantization Noise, unified
weighted acc. to [567]
Non-linear distortion
Differential Gain
Differential Phase
Linear distortion
2T pulse response
2T pulse to bar
2T bar response
50 Hz square wave response
Bounce
Chrominance luminance inequality
Gain, 20 T pulse
C
Delay, 20 T pulse
C
SCH phase error
Steady state characteristics
Frequency response
(relative to white bar)
Group delay response (reference
at 500 kHz)
Video formats
Connector type
Nominal output impedance
Isolation between outputs
Return loss
encoder, 4:2:2 chroma and video bit rate > 17 Mbit/s.
0.1 Hz/s, PAL system I and NTSC
measurement time > 0.2 s
< 2%
PP
0 dB ±0.2 dB
3 dB ±0.2 dB (-3 dB input level)
±0.10 dB / 1 hour
±0.15 dB / 24 hour
< -60 dB RMS relative to 0.7V
≤ 1% peak to peak
≤ 1° peak to peak
≤ 1.0%
K
2T
≤ 0.5%)
98% to 102% (K
P/B
99.5% to 100.5%
99% to 100%
Peak-overshoot ≤ 1%
≤ ±2%
≤ ±10 ns
< ±5°
±0.2 dB, 10 Hz to 5.75 MHz
≥ -3 dB, 6 MHz
≤ -24 dB, 6.75 MHz
≤ -40 dB, 8 MHz to 27 MHz
≤ ±20 ns, 10 Hz to 5.5 MHz
PAL system M
NTSC system M, acc. to CCIR rep.
624-4
2
BNC
75 Ω
> 40 dB, 10 Hz to 5.5 MHz
> 35 dB, 10 Hz to 5.5 MHz
PAL-M video output
A
A-11