Program Selection - Barco STELLAR User And Service Manual

3
N

Program selection

Structure
Select program
Select audio 1 PID
Select audio 2 PID
46

Program selection

When you press the Program shortcut key, the "Program selection" appears.
Each parameter is described in the following. For instructions on how to edit the
parameters, see Navigating and editing, p. 39.
The menu has the following structure:
Program selection
Select program
<no> : Program name
Select audio 1 PID
<List of available PIDs>
Only if secondary audio card installed
Select audio 2 PID
<List of available PIDs>
Select Nx64 PID
<List of available PIDs>
Parameters No., Auto or Off
Description The number and name of the program to be decoded. You select
the program to be decoded by pressing the Enter key and stepping
through the list of available programs. If you select "Auto" the
S
TELLAR
number. "Off" disables decoding.
Description The audio program to be decoded. A program may contain several
audio signals. You select the audio program to be decoded by
pressing the Enter key and stepping through the list of available
audio programs. If you select "Auto" the S
decodes the audio program with the lowest PID not already in use.
"Off" disables decoding. This is the primary audio output.
Description The audio program to be decoded. Audio 2 PIDs can only be
selected if an audio module is installed in the option slot. A
program may contain several audio signals. You select the audio
program to be decoded by pressing the Enter key and stepping
through the list of available audio programs. If you select "Auto"
the S
TELLAR
lowest PID not already in use. "Off" disables decoding. This is an
optional audio output.
99-031
automatically decodes the program with the lowest
automatically decodes the audio program with the
automatically
TELLAR