Barco STELLAR User And Service Manual page 61

Video information 1
Display
Description
Video information 2
Display
Description
Video information 3 Display
Description
Video information 4
Display
Description
Video output format Parameters
Description
Video line start Parameters
Description
Note!
Profile: Main or 4:2:2
Displays the decoded profile.
Width: 352, 704 or 720 pixels
Height: 576 or 608 lines for 625 lines systems
480 or 512 lines for 525 lines systems
Displays the number of horizontal pixels and the number of lines
in the decoded picture.
Chroma: 4:2:2 or 4:2:0
Aspect: 4:3 or 16:9
Displays the chroma format and the aspect ratio of the decoded
picture.
Bit rate: 1.5 to 50 Mbit/s
Displays the measured video bit rate.
PAL, PALplus, NTSC, PAL-M
625, 525.
You can select between 525 lines NTSC and PAL M if your
module option supports both formats. There is auto-selection
between 625 lines PAL and PALplus.
6 to 23 for 635 lines systems, and 10 to 23 for 525 lines systems
Keep the line start on 23 unless the encoder is set up to use
extended picture area. Set the line start in the S
same value as in the encoder.
For the 4:2:0 profile there is no extended picture data. If you
move the start of the picture lines up you get the equivalent
number of blank lines in the bottom of the picture.
3
to the
TELLAR
49
Video output