Control Connectors; Connecting A Pc To The Codec - Barco STELLAR User And Service Manual

2
N

Control connectors

N

Connecting a PC to the codec

Overview
28

Connecting a PC to the codec

You can set up and control the S
trol system ROSA.
The S can be controlled via a PC in three different ways:
TELLAR
Control Connector
Local Front panel, RS-232
local
Local Connector RS-485
panel,
remote
Remote Connector RS-485
panel,
remote
by using a PC and the management and con-
TELLAR
Comm.
Local setup and control of one S
Cable length between the S
PC up to 5 m.
Local setup and control of one S
Cable length between the S
PC up to 50 m.
Permanent monitoring and management of
several S decoders in a network. The
TELLAR
PC is connected to the Management system
C (industrial computer). Cable
OPERNICUS
length up to 50 m.
Use
.
TELLAR
and the
TELLAR
.
TELLAR
and the
TELLAR