Installing Rosa/Copernicus - Barco STELLAR User And Service Manual

4
N
Installing ROSA/C
System requirements
Installation procedure
64
Installing ROSA/C
OPERNICUS
OPERNICUS
The following table shows the minimum PC requirements for running the S
control software:
Item Requirements
PC Pentium based, minimum speed 120 MHz
Operating system MS Windows 95, MS Windows 98 or Windows NT 4.0,
including MS Internet Explorer 4.0 or greater
RAM 32 MB minimum
Mouse Windows compatible
Display SVGA Color monitor, preferably 17"
SVGA graphics card 800 x 600 pixels in 256 colors; 1024x768 and
acceleration recommended
CD ROM drive Yes
Note! If you want to install ROSA/C
with several codecs you also need a serial I/O card or an RS-232/RS-
485 converter. Furthermore the TCP/IP protocol must be installed on the
ROSA PC.
Do as follows to install the ROSA/C
1. Install the ROSA Device Configuration Shell on your PC, or install C
on the C
NICUS OPERNICUS
For further information see the ROSA or the C
in a network environment
OPERNICUS
:
OPERNICUS
server and ROSA on the client PC.
OPERNICUS
TELLAR
-
OPER
User Manual.