Naming A Program - Barco STELLAR User And Service Manual

N

Naming a program

To name a program You may want to name the programs being output.
Do as follows to name a program:
1. From the Codec Explorer right-click on the icon representing the program
to name and select Properties.
The settings view for the program is displayed. The program number and PMT
PID is read from the transport stream and cannot be changed.
2. Type the name in the Name field.
All alphanumeric characters are allowed. Up to 32 characters are allowed. The
supported character set is the Windows System Character set.
Note! The name is not stored in the S
apply to all programs with that number.
3. Click Apply.
but only in ROSA and it will
TELLAR

Naming a program

4
83