Barco STELLAR User And Service Manual page 21

ASI input
When installed with the ASI input the S
stream format as 188 or 204 bytes packet lengths and performs RS (204,188) error
correction when FEC is included in the transport stream.
ASI restamping output
When installed with the ASI restamping output option the S
transport stream recovered from the input. The output bit rate of the S
set from 1 to 92 Mbit/s. The physical rate for the ASI restamping output is always
270 Mbit/s.
SMPTE 310M output
When installed with the SMPTE 310M output option S
Mbit/s SMPTE 310M data stream from the DS3 data stream if this data is inserted in
the DS3 output by the upstream encoder.
automatically detects the transport
TELLAR
can relay the full
TELLAR
can extract the 19.39
TELLAR
Network and TS interfaces
1
can be
TELLAR
9