Ts Input - Barco STELLAR User And Service Manual

A
N

TS input

SPI input
ASI input
V.35 input
A-6
TS input
Number of inputs
Connector type
Input Impedance
Data amplitude
Minimum eye opening
V
min
T
min
Input Clock rate
Transport Stream formats
ASI format
Number of inputs
Connector type
Input Impedance
Input return loss
Data amplitude
Input transport stream bit rate
Transport Stream formats
Number of inputs
Number of active loop trough outputs
Input type
Clock
Connector type
Cable type
Input impedance
Output impedance
Output data amplitude
Output Rise time
Output DC line offset
2
25 pin Sub-D female according to
EN 50083-9.
100 Ω according to EN 50083-9.
LVDS, 0.1 V to 2,0 V peak-peak,
according to EN 50083-9
According to EN 50083-9
< 100 mV
< 1/3 of T
norm
125 kHz to 11.5 MHz (correspond-
ing to 1 to 92 Mbit/s).
According to EN 50083-9
188 bytes structure
188 plus 16 bytes structure
204 bytes structure including
(204,188) Reed Solomon
Packet or burst (byte) or any com-
bination of packet/burst
2 with active loop through
75 Ω BNC female
75 Ω according to EN 50083-9
> 17 dB, 27 to 270 MHz
0.2 to 1 V peak-peak, according to
EN 50083-9
1 to 9 2Mbit/s
According to EN 50083-9
188 bytes structure
188 plus 16 bytes structure
204 bytes structure including
(204,188) Reed Solomon
1
1
Serial binary data.
Gapped or smooth
25 pin Sub-D female
Balanced twisted multi-pair with
an impedance between 80 and 100
Ω.
100 ± 10 Ω
50 to 150 Ω
0,55 volt ± 20%
<1% of the nominal duration of a
signal element or < 40 nanosec-
onds
< 0.6 volt when terminated