Setting Up The Ids And Vps Lines (Vbi 3) - Barco STELLAR User And Service Manual

4
N

Setting up the IDS and VPS lines (VBI 3)

To set up the IDS and
VPS lines
94

Setting up the IDS and VPS lines (VBI 3)

The IDS and VPS lines generated at the P
put of the S .
TELLAR
Do as follows to set up the Insertion Data Signal (IDS) and Video Program Signal
(VPS) lines.
1. From the Codec Explorer right-click on the icon representing the VBI 3
(IDS and VPS lines) you want to set up and select Properties.
Note! The text explaining the VBI 3 icon in the codec explorer window
shows the presence of VPS or IDS.
2. To enable VPS click VPS.
3. To enable IDS click IDS.
4. Click Apply.
can be output at the composite out-
OLARIS