Danfoss VLT HVAC Series Programming Manual page 39

VLT ® HVAC Drive Programming Guide
3.2.7 0-5* Copy / Save
Copy parameter settings between set-ups and to/from the LCP.
0-50 LCP Copy
Option:
[0] * No copy
[1] All to LCP
[2] All from LCP
[3] Size indep. of LCP
This parameter cannot be adjusted while the motor is running.
0-51 Set-up Copy
Option:
[0] * No copy
[1] Copy to set-up 1
[2] Copy to set-up 2
[3] Copy to set-up 3
[4] Copy to set-up 4
[9] Copy to all
3.2.8 0-6* Password
Define password access to menus.
0-60 Main Menu Password
Range:
100 N/A* [0 - 999 N/A]
0-61 Access to Main Menu w/o Password
Option:
[0] * Full access
[1] Read-only
[2] No access
[16] All: No access
Full access
If [0] is selected then par.0-60
word
will be ignored.
Function:
No function
Copies all parameters in all set-ups from the adjustable frequency drive memory to the LCP memory.
For service purposes, it is recommended to copy all parameters to the LCP after commissioning.
Copies all parameters in all set-ups from the LCP memory to the adjustable frequency drive memory.
Copies only the parameters that are independent of the motor size. The latter selection can be used
to program several adjustable frequency drives with the same function without disturbing motor
data which are already set.
Function:
No function
Copies all parameters in the present Programming Set-up (defined in par.0-11
up
) to Set-up 1.
Copies all parameters in the present Programming Set-up (defined in par.0-11
up ) to Set-up 2.
Copies all parameters in the present Programming Set-up (defined in par.0-11
up
) to Set-up 3.
Copies all parameters in the present Programming Set-up (defined in par.0-11
up
) to Set-up 4.
Copies the parameters in the present set-up over to each of the Set-ups 1 to 4.
Function:
Define the password for access to the main menu via the [Main Menu] key. If par.0-61
Main Menu w/o Password
is set to
Function:
Disables password defined in par.0-60
Prevent unauthorized editing of main menu parameters.
Prevent unauthorized viewing and editing of main menu parameters.
Main Menu Password Personal Menu Password
, par.0-65
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Full access
[0], this parameter will be ignored.
Main Menu Password
.
Access to Personal Menu w/o Pass-
and par.0-66
3
Programming Set-
Programming Set-
Programming Set-
Programming Set-
Access to
3-15