Danfoss VLT HVAC Series Programming Manual page 18

2 How to Program
2
Figure 2.13: Step 7: Use the up/down navigation keys to
navigate between the different choices. Press [OK].
Function Set-ups parameters
The Function Set-ups parameters are grouped in the following way:
Q3-10 Adv. Motor Settings
Motor Thermal Protection
par.1-90
par.1-93 Thermistor Source
par.1-29 Automatic Motor Adapta-
tion (AMA)
Switching Frequency
par.14-01
par.4-53 Warning Speed High
Q3-20 Digital Reference
Minimum Reference
par.3-02
Maximum Reference
par.3-03
par.3-10 Preset Reference
Terminal 29 Digital Input
par.5-13
par.5-14 Terminal 32 Digital Input
Terminal 33 Digital Input
par.5-15
2-14
Q3-1 General Settings
Q3-11 Analog Output Q3-12 Clock Settings
Terminal 42 Output
par.6-50 par.0-70
par.6-51 Terminal 42 Output Min par.0-71
Scale
par.6-52 Terminal 42 Output Max par.0-72
Scale
par.0-74
par.0-76
par.0-77
Q3-2 Open-loop Settings
MG.11.C6.22 - VLT
VLT ®
Q3-13 Display Settings
Set Date and Time
par.0-20
Date Format par. 0-21
Time Format par. 0-22
DST/Summertime
par. 0-23
DST/Summertime Start par. 0-24
DST/Summertime End
par.0-37
par.0-38
par.0-39
Q3-21 Analog Reference
Minimum Reference
par.3-02
Maximum Reference
par.3-03
par.6-10 Terminal 53 Low Voltage
Terminal 53 High Voltage
par.6-11
par.6-12 Terminal 53 Low Current
Terminal 53 High Current
par.6-13
Terminal 53 Low Ref./Feedb. Value
par.6-14
Terminal 53 High Ref./Feedb. Value
par.6-15
® is a registered Danfoss trademark
HVAC Drive Programming Guide
Display Line 1.1 Small
Display Line 1.2 Small
Display Line 1.3 Small
Display Line 2 Large
Display Line 3 Large
Display Text 1
Display Text 2
Display Text 3