Danfoss VLT HVAC Series Programming Manual page 179

VLT ® HVAC Drive Programming Guide
16-53 Digi Pot Reference
Range:
0.00 N/A* [-200.00 - 200.00 N/A]
16-54 Feedback 1 [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
16-55 Feedback 2 [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
16-56 Feedback 3 [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
16-58 PID Output [%]
Range:
0.0 %* [0.0 - 100.0 %]
Function:
View the contribution of the digital potentiometer to the actual reference.
Function:
View value of Feedback 1, see par. 20-0*
The value is limited by settings in par. and par. . Units as set in par.20-12
Unit
.
Function:
View value of Feedback 2, see par. 20-0*
The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par.20-12
Feedback Unit .
Function:
View value of Feedback 3, see par. 20-0*
The value is limited by settings in par.20-13
Reference/Feedb.
. Units as set in par.20-12
Function:
This parameter returns the Drive Closed-loop PID controller output value in percent.
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Feedback
.
Reference/Feedback
Feedback .
Feedback
.
Minimum Reference/Feedb.
and par.20-14
Reference/Feedback Unit
.
3
Reference/
Maximum
3-155