Danfoss VLT HVAC Series Programming Manual page 280

3 Parameter Description
26-43 Terminal X42/7 Output Bus Control
Range:
0.00 %* [0.00 - 100.00 %]
26-44 Terminal X42/7 Output Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
3
26-50 Terminal X42/9 Output
Option:
[0] * No operation
[100] Output frequency
[101] Reference
[102] Feedback
[103] Motor current
[104] Torque rel to limit
[105] Torq relate to rated
[106] Power
[107] Speed
[113] Ext. Closed-loop 1
[114] Ext. Closed-loop 2
[115] Ext. Closed-loop 3
[139] Bus ctrl.
[141] Bus ctrl t.o.
26-51 Terminal X42/9 Min. Scale
Range:
0.00 %* [0.00 - 200.00 %]
See principle graph for par.6-51
3-256
Function:
Holds the level of terminal X42/7 if controlled by the bus.
Function:
Holds the preset level of terminal X42/7.
In case of a bus timeout and a timeout function is selected in par.26-50
output will preset to this level.
Function:
Set the function of terminal X42/9.
Function:
Scale the minimum output of the selected analog signal at terminal X42/9, as a percentage of the
maximum signal level, for example if a 0 V is desired at 25% of the maximum output value. Then
program 25%. Scaling values up to 100% can never be higher than the corresponding setting in
Terminal X42/9 Max. Scale
par.26-52
Terminal 42 Output Min Scale
.
MG.11.C6.22 - VLT
VLT ® HVAC Drive Programming Guide
.
® is a registered Danfoss trademark
Terminal X42/9 Output
, the