Table of Contents
Advertisement
3 Parameter Description
16-35 Inverter Thermal
Range:
0 %*
[0 - 100 %]
16-36 Inv. Nom. Current
Range:
10.00 A*
[0.01 - 10000.00 A]
3
16-37 Inv. Max. Current
Range:
16.00 A*
[0.01 - 10000.00 A]
16-38 SL Controller State
Range:
0 N/A*
[0 - 100 N/A]
16-39 Control Card Temp.
Range:
0 C*
[0 - 100 C]
16-40 Logging Buffer Full
Option:
[0] *
No
[1]
Yes
3.16.5 16-5* Ref. & Feedb.
Parameters for reporting the reference and feedback input.
16-50 External Reference
Range:
0.0 N/A*
[-200.0 - 200.0 N/A]
16-52 Feedback [Unit]
Range:
0.000 Proc-
[-999999.999 - 999999.999 Proc-
essCtrlU-
essCtrlUnit]
nit*
3-154
Function:
View the percentage load on the inverter.
Function:
View the inverter nominal current, which should match the nameplate data on the connected motor.
The data is used for motor protection, calculating torque, etc.
Function:
View the inverter maximum current, which should match the nameplate data on the connected
motor. The data is used for motor protection, calculating torque, etc.
Function:
View the state of the event under execution by the SL controller.
Function:
Function:
View whether the logging buffer is full (see par. 15-1*). The logging buffer will never be full when
par.15-13
Logging Mode
is set to
Log always
Function:
View the total reference, the sum of digital, analog, preset, bus and freeze references, plus catch-
up and slow-down.
Function:
View value of resulting feedback value after processing of Feedback 1-3 (see par.16-54
1 [Unit]
Feedback 2 [Unit]
, par.16-55
Feedback
See par. 20-0*
.
The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par.20-12
Feedback Unit
.
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
VLT
®
HVAC Drive Programming Guide
[0].
and par. 16-56) in the feedback manager.
Feedback
Reference/
Advertisement
Table of Contents
