Danfoss VLT HVAC Series Programming Manual page 122

3 Parameter Description
8-55 Set-up Select
Option:
[0] Digital input
[1] Bus
3
[2] Logic AND
[3] * Logic OR
NOTE!
This parameter is active only when par.8-01
8-56 Preset Reference Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NOTE!
This parameter is active only when par.8-01
3.9.6 8-7* BACnet
BACnet configuration
8-70 BACnet Device Instance
Range:
1 N/A* [0 - 4194304 N/A]
NOTE!
This parameter is active only when par.8-30
3-98
Function:
Select control of the adjustable frequency drive set-up selection via the terminals (digital input) and/
or via the serial communication bus.
Activates the set-up selection via a digital input.
Activates the set-up selection via the serial communication port or serial communication option.
Activates the set-up selection via the serial communication bus/serial communication port, AND
additionally via one of the digital inputs.
Activate the set-up selection via the serial communication bus/serial communication port OR via one
of the digital inputs.
Control Site Digital and control word
is set to [0]
Function:
Select control of the adjustable frequency drive Preset Reference selection via the terminals (digital
input) and/or via the serial communication bus.
Activates Preset Reference selection via a digital input.
Activates Preset Reference selection via the serial communication port or serial communication op-
tion.
Activates Preset Reference selection via the serial communication bus/serial communication port,
AND additionally via one of the digital inputs.
Activates the Preset Reference selection via the serial communication bus/serial communication port
OR via one of the digital inputs.
Control Site is set to [0] Digital and control word
Function:
Enter a unique ID number for the BACnet device.
Protocol is set to [9] Adjustable Frequency Drive Option
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Programming Guide
.
.
.