Danfoss VLT HVAC Series Programming Manual page 152

3 Parameter Description
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
3
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-43 Logic Rule Operator 2
Array [6]
Option:
[0] * DISABLED
[1] AND
[2] OR
[3] AND NOT
[4] OR NOT
[5] NOT AND
[6] NOT OR
[7] NOT AND NOT
[8] NOT OR NOT
3-128
Function:
Select the second logical operator to be used on the Boolean input calculated in par.13-40
Rule Boolean 1 , par.13-41 Logic Rule Operator 1
Boolean input coming from par.13-42
[13-44] signifies the Boolean input of par.13-44
[13-40/13-42] signifies the Boolean input calculated in par.13-40
Logic Rule Operator 1
13-41 , and par.13-42
select this option to ignore par.13-44
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Programming Guide
, and par.13-42 Logic Rule Boolean 2
Logic Rule Boolean 2 .
Logic Rule Boolean 3
.
Logic Rule Boolean 1
Logic Rule Boolean 2
. DISABLED [0] (factory setting).
Logic Rule Boolean 3
.
Logic
, and the
, par.