Danfoss VLT HVAC Series Programming Manual page 98

3 Parameter Description
5-41 On Delay, Relay
Array [8](Relay 1 [0], Relay 2 [1], Relay 3 [2], Relay 4 [3], Relay 5 [4], Relay 6 [5], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Range:
0.01 s* [0.01 - 600.00 s]
3
5-42 Off Delay, Relay
Array [8] (Relay 1 [0], Relay 2 [1], Relay 3 [2], Relay 4 [3], Relay 5 [4], Relay 6 [5], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Range:
0.01 s* [0.01 - 600.00 s]
If the selected event condition changes before the on or off delay timer expires, the relay output is unaffected.
3-74
Function:
Enter the delay of the relay cut-in time. Select one of available mechanical relays and MCO 105 in
Function Relay
an array function. See par.5-40
Function:
Enter the delay of the relay cut-out time. Select one of available mechanical relays and MCO 105 in
an array function. See par.5-40 Function Relay
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Programming Guide
. Relay 3-6 are included in MCB 112 (ATEX).
.