Danfoss VLT HVAC Series Programming Manual page 146

3 Parameter Description
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
3
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-03 Reset SLC
Option:
[0] * Do not reset SLC
[1] Reset SLC
3-122
This event is TRUE if the adjustable frequency drive is tripped (but not trip-locked) and the reset
button is pressed.
This event is TRUE if the adjustable frequency drive is tripped (but not trip-locked) and an automatic
reset is issued.
This event is TRUE if the OK key on the LCP is pressed.
This event is TRUE if the Reset key on the LCP is pressed.
This event is TRUE if the Left key on the LCP is pressed.
This event is TRUE if the Right key on the LCP is pressed.
This event is TRUE if the Up key on the LCP is pressed.
This event is TRUE if the Down key on the LCP is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Use the result of timer 3 in the logic rule.
Use the result of timer 4 in the logic rule.
Use the result of timer 5 in the logic rule.
Use the result of timer 6 in the logic rule.
Use the result of timer 7 in the logic rule.
Function:
Retains programmed settings in all group 13 parameters (13-*).
Resets all group 13 parameters (13-*) to default settings.
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Programming Guide