Danfoss VLT HVAC Series Programming Manual page 249

VLT ® HVAC Drive Programming Guide
NOTE!
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-64 Timed Period Stop
Range:
0 N/A* [0 - 0 N/A]
NOTE!
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-65 Minimum Bin Value
Range:
0 %* [0 - 100. %]
23-66 Reset Continuous Bin Data
Option:
[0] * Do not reset
[1] Do reset
23-67 Reset Timed Bin Data
Option:
[0] * Do not reset
[1] Do reset
Function:
Set the date and time at which the trend analyses must stop update of the timed bin counters.
Date format will depend on setting in par.0-71
Time Format
0-72 .
Function:
Array with 10 elements ([0]–[9] below parameter number in display). Press OK and step between
▲ ▼
elements by means of and
Set the minimum limit for each interval in par.23-61
Data counter
. Example: if selecting
based on the interval 0%–<12% and
Function:
Select Do reset [1] to reset all values in par.23-61
After pressing OK, the setting of the parameter value will automatically change to
Function:
Do reset
Select [1] to reset all counters in par.23-62
After pressing OK, the setting of the parameter value will automatically change to
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
Date Format , and time format on setting in par.
buttons on the LCP.
Continuous Bin Data
[1] and changing setting from 10% to 12%,
counter
[1] on interval 12%–<20%.
Continuous Bin Data
Timed Bin Data
.
3 Parameter Description
3
and par.23-62 Timed Bin
counter
[0] will be
.
Do not reset [0].
Do not reset
[0].
3-225