Danfoss VLT HVAC Series Programming Manual page 38

3 Parameter Description
3.2.6 LCP Keypad, 0-4*
Enable, disable and password-protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
[1] * Enabled
3
[2] Password
0-41 [Off] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
0-42 [Auto on] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
0-43 [Reset] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
3-14
Function:
No function
[Hand on] Key enabled
Avoid unauthorized start in hand mode. If par.0-40
Personal Menu, then define the password in par.0-65
Password. Otherwise, define the password in par.0-60
word.
Function:
No function
[Off] Key is enabled
Avoid unauthorized stop. If par.0-41
Personal Menu, then define the password in par.0-65
Password. Otherwise, define the password in par.0-60
word.
Function:
No function
[Auto on] Key is enabled
Avoid unauthorized start in auto mode. If par.0-42
Personal Menu, then define the password in par.0-65
Main Menu Password
the password in par.0-60
Function:
No function
[Reset] Key is enabled
Avoid unauthorized resetting. If par.0-43
Menu , then define the password in par.0-65
word in par.0-60 Main Menu Password
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Programming Guide
[Hand on] Key on LCP
Personal Menu Password
Main Menu Password
[Off] Key on LCP
0-41 [Off] Key on LCP is included in the My
Personal Menu Password
Main Menu Password
[Auto on] Key on LCP
Personal Menu Password
.
[Reset] Key on LCP
is included in the par.0-25
Personal Menu Password . Otherwise, define the pass-
.
is included in the My
0-65 Personal Menu
0-60 Main Menu Pass-
0-65 Personal Menu
0-60 Main Menu Pass-
is included in the My
. Otherwise, define
My Personal