Table of Contents
Advertisement
VLT
®
HVAC Drive Programming Guide
23-81 Energy Cost
Range:
1.00 N/A*
[0.00 - 999999.99 N/A]
23-82 Investment
Range:
0 N/A*
[0 - 999999999 N/A]
23-83 Energy Savings
Range:
0 kWh*
[0 - 0 kWh]
23-84 Cost Savings
Range:
0 N/A*
[0 - 2147483647 N/A]
Function:
Set the current cost for a kWh in local currency. If the energy cost is changed later on, it will impact
the calculation for the entire period!
Function:
Set the value of the investment spent on upgrading the plant with speed control, in same currency
as used in par.23-81
Energy Cost
Function:
This parameter allows for a readout of the accumulated difference between the reference power
and the actual output power.
If the motor size is set in HP (par.1-21
the Energy Savings.
Function:
This parameter allows a readout of the calculation based on the above equation (in local currency).
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
.
Motor Power [HP]
), the equivalent kW value will be used for
3 Parameter Description
3
3-227
Advertisement
Table of Contents
