Danfoss VLT HVAC Series Programming Manual page 34

3 Parameter Description
[2158] Ext. 3 Feedback [Unit]
[2159] Ext. 3 Output [%]
[2230] No-Flow Power
[2316] Maintenance Text
[2580] Cascade Status
[2581] Pump Status
3
[3110] Bypass Status Word
[3111] Bypass Running Hours
NOTE!
Consult the
0-21 Display Line 1.2 Small
Option:
[1614] * Motor Current
0-22 Display Line 1.3 Small
Option:
[1610] * Power [kW]
0-23 Display Line 2 Large
Option:
[1613] * Frequency
0-24 Display Line 3 Large
Option:
[1502] * kWh Counter
0-25 My Personal Menu
Array [20]
Range:
0 N/A* [0 - 9999 N/A]
3-10
The value of the feedback signal for extended Closed-loop Controller 3
The value of the output from extended Closed-loop Controller 3
The calculated No-Flow Power for the actual operating speed
Status for the operation of the cascade controller
Status for the operation of each individual pump controlled by the cascade controller
VLT HVAC Drive Programming Guide, MG.11.CX.YY
Function:
Select a variable for display in line 1, middle position.
The options are the same as those listed in par.0-20
Function:
Select a variable for display in line 1, right position.
The options are the same as those listed in par.0-20
Function:
Select a variable for display in line 2.
The options are the same as those listed in par.0-20
Function:
Select a variable for display in line 3. The options are the same as listed for par. 0-20.
Function:
Define up to 20 parameters to appear in the Q1 Personal Menu, accessible via the [Quick Menu]
key on the LCP. The parameters will be displayed in the Q1 Personal Menu in the order they are
programmed into this array parameter. Delete parameters by setting the value to '0000'.
For example, this can be used to provide quick, simple access to just one or up to 20 parameters
which require changing on a regular basis (e.g., for plant maintenance reasons) or by an OEM to
enable simple commissioning of their equipment.
MG.11.C6.22 - VLT
VLT ® HVAC Drive Programming Guide
for detailed information.
Display Line 1.1 Small
Display Line 1.1 Small
Display Line 1.1 Small
® is a registered Danfoss trademark
.
.
.