Figure 30: "Scaling" Menu Item (Example Channel 1) - WAGO 750-489 Manual

WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i
The scaling process is performed on a channel basis; therefore, before the save
operation, be sure to select the corresponding channel.
Checking/unchecking the box has an immediate effect!
When the box is checked, the setting is written immediately to the I/O module; it
is not necessary to click the [Write] button.
Click the [Write] button to save any settings you have made and apply them to
the I/O module.
Scaling is saved permanently, i.e. still available after the node is restarted.

Figure 30: "Scaling" Menu Item (Example Channel 1)

Commissioning 133
Version 1.1.0, valid from FW Version 02
Manual