Figure 32: "User Calibration" Dialog - Offset Correction; Figure 33: "User Calibration" Dialog - Gain Correction - WAGO 750-489 Manual

WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i
Proceed as follows:
1. Select the channel to calibrate by switching to the corresponding tab.
2. Click the [Start Calibration] button.
A dialog opens.
3. Follow the instructions in the dialog.
.
Figure 32: "User Calibration" Dialog – Offset Correction
Figure 33: "User Calibration" Dialog – Gain Correction
Commissioning 137
Version 1.1.0, valid from FW Version 02
Manual