WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i
7.1.2.2
Channel Settings
Menu items [Channel 1] to [Channel 4] contain the channel-specific parameters
of the I/O module. The parameter list is identical for all channels. If you change a
value, a pen symbol appears to the left of the parameter in question, and the
[Write] button, which had been grayed out before, is enabled.
Click the [Write] button to save any settings you have been made and apply
them to the I/O module!
Figure 29: Menu Item "Channel 1" (Example)
Commissioning 129
Version 1.1.0, valid from FW Version 02
Manual