126 Commissioning
7.1.1.2
Information Bar
• Item number: 750-489
• Item description: 4AI RTD/TC/Strain Gauge Ex i
• Version: 01.01.xx(xx)
7.1.1.3
Buttons
Table 139: Buttons
Button
Manual
Version 1.1.0, valid from FW Version 02
Function Explanation
Closes the parameterization dialog.
[Exit]
The connection to the I/O module is interrupted.
[Open]
Opens the dialog for loading a saved parameter file.
Opens the dialog for saving parameterization
[Save]
information in a parameter file.
Reads the current parameterization from the I/O
[Read]
module.
[Write]
Writes the modified parameters to the I/O module.
Resets all I/O module settings to factory settings
Note: The values for the user calibration are also reset
to their default values. Therefore, after the factory
[Factory
settings are restored, modified values must be modified
Settings]
again and written to the I/O module.
Tip: Make a note of any value settings before resetting
the I/O module.
[Help]
Opens an I/O module help dialog.
WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i