Temperature Measurement (Celsius) - WAGO 750-489 Manual

46 Process Image
4.4

Temperature Measurement (Celsius)

For RTD/TC measurements in the standard format/Celsius, the temperature
values are represented at a resolution of one digit per 0.1 °C.
In the S5-FB250 format/Celsius (RTD/TC measurement with "Celsius" setting,
with S5-FB250 format activated), the temperature values are represented at a
resolution of one digit per 1.0 °C. The status information is represented in bit 0 to
bit 2 and the digitized measured value in bit 3 to bit 15.
Representation in the tables: Corresponding monitoring must be switched
on!
The "Underflow", "Overflow", "Underrange" and "Overrange" areas require that
the corresponding monitoring is switched on (see Section "Diagnostics" >
"Behavior of the I/O Module in the Event of Error").
Manual
Version 1.1.0, valid from FW Version 02
WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i