WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i
6.3
Connection Examples
Disable unneeded inputs!
The I/O module (750-489) has very sensitive measurement inputs.
Disable the channel of unused inputs to avoid unwanted error messages.
Section "Configuration and Parameterization with WAGO-IO-CHECK" describes
how one channel, or the channel diagnostics of individual inputs, of the I/O
module can be switched on/off.
6.3.1
RTDs – Resistance Thermometers
Figure 19: Connection Example: RTD (Resistance Thermometer), 2- and 3-Wire Technology
Figure 20: Connection Example: RTD (Resistance Thermometer), 4-Wire Technology
Connect Devices 117
Version 1.1.0, valid from FW Version 02
Manual