ProMinent DULCOMETER diaLog DACb Assembly And Operating Instruction page 94
Multi-parameter controller
Hide thumbs
Also See for DULCOMETER diaLog DACb:
- Assembly and operating instructions manual (180 pages)
Table of Contents
Advertisement
Calibration
Incorrect calibration
An error message appears if the result of the calibration lies outside the specified tolerance
limits. In this case the current calibration is not carried over.
Check the prerequisites for calibration and eliminate the error. Then repeat calibration.
5.
Carry over the result of the calibration into the controller memory by pressing
The controller shows the continuous display again and operates with the results of the
ð
calibration.
94
.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DULCOMETER diaLog DACb and is the answer not in the manual?
Questions and answers
How do I calibrate measuring channel
To calibrate a measuring channel on a ProMinent diaLog DACb:
1. Select the channel to be calibrated (e.g., Channel 1: Chlorine).
2. Access the [Calibration] menu from the continuous display.
3. Follow the on-screen instructions to perform the calibration.
4. Adjust the value using the appropriate buttons if prompted.
5. Import the calibration result into the controller memory by pressing the confirmation button.
6. The controller will return to the continuous display and use the new calibration values.
If calibration values are outside specified limits, an error message appears, and the calibration is not saved. In that case, check conditions, correct any issues, and repeat the calibration. Each measuring channel must be calibrated separately.
This answer is automatically generated