Setting Limit Values Channel 1; Setting [Limit 1]; Setting [Limit 2] - ProMinent DULCOMETER diaLog DACb Assembly And Operating Instruction
Multi-parameter controller
Hide thumbs
Also See for DULCOMETER diaLog DACb:
- Assembly and operating instructions manual (180 pages)
Table of Contents
Advertisement
12.2
Setting limit values channel 1
Continuous display ➨
[Limit value channel 1] ➨
Limit values ch. 1
Limit value 1
Limit value 2
System response / hysteresis
Fig. 94: Setting limit values channel 1
12.2.1
Setting [Limit 1]
Continuous display ➨
[Limit values] ➨
[Limit values] ➨
[Limit value channel 1] ➨
[Limit ch. 1] ➨
or
Limit 1
Function
Value
ON delay
OFF delay
No relays assigned!
Please assign in <Relays> menu.
Fig. 95: Setting Limit 1
[Limit values] ➨
➨
or
[Limit value channel 1]
➨
or
or
[Limit ch. 1] ➨
[Limit 1]
4.1.1.4
Low limit
6,00 pH
A1013
Setting the
[Limit values] ➨
12.2.2
Setting [Limit 2]
Continuous display ➨
[Limit values] ➨
[Limit values] ➨
[Limit value channel 1] ➨
[Limit value channel 1] ➨
[Limit 2]
[Limit values]
or
4.1.5
A1012
➨
or
or
[Limit 2] ➨
or
141
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DULCOMETER diaLog DACb and is the answer not in the manual?
Questions and answers
How do I calibrate measuring channel
To calibrate a measuring channel on a ProMinent diaLog DACb:
1. Select the channel to be calibrated (e.g., Channel 1: Chlorine).
2. Access the [Calibration] menu from the continuous display.
3. Follow the on-screen instructions to perform the calibration.
4. Adjust the value using the appropriate buttons if prompted.
5. Import the calibration result into the controller memory by pressing the confirmation button.
6. The controller will return to the continuous display and use the new calibration values.
If calibration values are outside specified limits, an error message appears, and the calibration is not saved. In that case, check conditions, correct any issues, and repeat the calibration. Each measuring channel must be calibrated separately.
This answer is automatically generated