Priming To Bleeding - ProMinent DULCOMETER diaLog DACb Assembly And Operating Instruction

Sensor Connector
LM1-TA Fixed cable
0.34 mm
5 m,
shielded
LMP1 DIN 4-pin
LMP1-HT DIN 4-pin
LMP1-TA Fixed cable
0.34 mm
5 m,
shielded
CK1 DIN 4-pin
CKPt1 DIN 4-pin
7.4

Priming to bleeding

The pump is working at 100%
performance
Note any installation work in your sur‐
roundings, as feed chemical can
uncontrollably escape into the environ‐
ment in the event of open pipes etc.
Pump 1
Function Decrease value
Max. stroke rate
Assignment Channel 1
Cell con‐ T-correction
stant element
Cell con‐
stant (1/cm)
1.00 -
,
2
1.00 Pt100
1.00 Pt100
1.00 Pt100
2 ,
1.00 -
1.00 Pt100
A1068
Assembly and installation
Max. temp. Measuring
range κ min
(°C)
(Unit)
70 0.1 mS/cm
70 0.1 mS/cm
120 0.1 mS/cm
70 0.1 mS/cm
150 0.01 mS/cm 20 mS/cm
150 0.01 mS/cm 20 mS/cm
Fig. 29: [Prime with <OK>] e.g. to bleed a pump
If you select the function
when the pumps are connected and operable,
the pumps continue to operate at 100% power
for as long as you press and hold down the
key.
You can use this function, for example, to
transport the feed chemical to the pump,
thereby bleeding the metering line.
Measuring
range κ
max
(Unit)
20 mS/cm
20 mS/cm
20 mS/cm
20 mS/cm
[Prime with <OK>]
65