System Configuration Display - Mitsubishi Electric MELSERVO-J5 MR-J5 Series User Manual

System configuration display

System information including the serial number and model of the servo amplifier, servo motor, and other equipment are
displayed. The items displayed in the configuration window vary depending on the servo amplifier. When MR Configurator2 is
connected to the servo amplifier, the values are displayed.
Displayed items [G] [WG]
The following items can be checked in the system configuration window.
• Servo amplifier identification information
• Servo amplifier serial No.
• Servo amplifier S/W No.
• Optional unit identification information
• Optional unit serial No.
• Optional unit S/W No.
• MAC address
• IP address
• Motor model
• Motor ID
• Motor serial No.
• Encoder resolution
• Encoder maximum multi-revolution [rev]
• Accumulated power-on time [h]
• Number of inrush relay on/off times [times]
• Number of dynamic brake relay on/off times [times]
• LED display
Displayed items [A]
The following items can be checked in the system configuration window.
• Servo amplifier identification information
• Servo amplifier serial No.
• Servo amplifier S/W No.
• Optional unit identification information
• Optional unit serial No.
• Optional unit S/W No.
• Motor model
• Motor ID
• Motor serial No.
• Encoder resolution
• Encoder maximum multi-revolution [rev]
• Accumulated power-on time [h]
• Number of inrush relay on/off times [times]
• Number of dynamic brake relay on/off times [times]
5 MONITORING
310
5.2 Checking with MR Configurator2