Chapter 5 Monitoring; Explanation Of Monitor Signals; Name And Description Of The Monitor Signals - Mitsubishi Electric MELSERVO-J5 MR-J5 Series User Manual

5
MONITORING
Summary [G] [WG]
The status of servo motor speed, torque, bus voltage, and other areas of the servo amplifier can be checked with the
engineering tools and analog monitor. This chapter shows an example when using MR Configurator2 as the engineering tool.
Items that can be monitored with "Display All" can also be monitored by objects. For details, refer to "Monitor Objects" in the
User's Manual (Object Dictionary).
Summary [A]
The status of servo motor speed, torque, bus voltage, and other areas of the servo amplifier can be checked with the
engineering tools and analog monitor. This chapter shows an example when using MR Configurator2 as the engineering tool.
For the 7-segment LED status display of the servo amplifier, refer to "Status display" in the following manual.
MR-J5-A User's Manual (Introduction)
5.1

Explanation of monitor signals

The name and description of the monitor signals used in the servo amplifier and the signal block diagram are as follows.

Name and description of the monitor signals

The following shows the types of monitor signals.
Monitor signal
Monitor signal (analog)
Monitor signal (digital)
Analog monitor
This chapter shows the name and description of each monitor signal. The unit and other areas may differ depending on the
control mode and display method. For "Display All" and the display of the graph in the monitor, refer to the following.
Page 308 Checking with MR Configurator2
For the analog monitor, refer to the following.
Page 311 Analog monitor [G] [WG]
Page 316 Analog monitor [A]
Description
The data, such as the servo motor speed, indicated in an analog form
The data, such as INP (In-position), indicated by on and off of bits
The data to output the servo amplifier status using voltage
5 MONITORING
5.1 Explanation of monitor signals
5
293