Mitsubishi Electric MELSERVO-J5 MR-J5 Series User Manual page 77

■Speed limit value selection
The speed limit can be selected with SP1 (Speed selection 1), SP2 (Speed selection 2), and SP3 (Speed selection 3).
*1
Input device
SP3 SP2
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
*1 0: OFF
1: ON
When internal speed 1 to 7 are used to limit a speed, the speed does not vary with the ambient temperature.
■VLC (Limiting speed)
VLC turns on when the servo motor speed reaches a speed limited with internal speed 1 to 7 or the analog speed limit.
Speed limit
SP1
0 VLA (Analog speed limit)
1 [Pr. PC05 Internal speed 1]
0 [Pr. PC06 Internal speed 2]
1 [Pr. PC07 Internal speed 3]
0 [Pr. PC08 Internal speed 4]
1 [Pr. PC09 Internal speed 5]
0 [Pr. PC10 Internal speed 6]
1 [Pr. PC11 Internal speed 7]
2 CONTROL MODE
75
2.2 Control mode [A]
2