Table of Contents
Advertisement
023: Stereo Analog Record
This effect simulates the noise caused by scratches and dust
on analog records. It also reproduces some of the modulation
caused by a warped turntable.
Stereo In - Stereo Out
Left
EQ Trim
Pre EQ
EQ Trim
Pre EQ
Right
Pre EQ
Trim
Sets the EQ input level.
Fc [Hz]
Sets the EQ center frequency.
Q
Sets the EQ band width.
Gain [dB]
Sets the EQ gain.
ANALOG RECORD
Speed [RPM]
Sets the rotation speed of the record.
Flutter
This parameter enables you to set the depth of the
modulation caused by a warped turntable.
024: Stereo Wave Shaper
This is a stereo effect that reshapes the waveform of the
input signal, generating numerous overtones that were not
present in the original signal.
Stereo In - Stereo Out
Left
Scale
Pre LPF
Right
D
-mod
D
-mod
D
-mod
WAVE SHAPER
Wave Shape Table
The table determines the basic timbre of the effect.
786
Analog Record
Simulation
[0...100]
[300...10.00k]
[0.5...10.0]
[–18.0...+18.0]
[33 1/3, 45, 78]
[0...100]
Wave Shape Table
LEQ
HEQ
Output Level
[Sine...Wurly]
NOISE
Density
Sets the noise density.
Tone
Wet / Dry
Sets the noise tone.
Level
Sets the noise level.
Wet / Dry
Source
Selects the modulation source for the noise level.
Amount
Sets the modulation amount of the noise level.
CLICK
Level
This parameter enables you to set the level of the click noise
that occurs once every rotation of the turntable. This
simulation reproduces record noise, and the noise generated
after the music on a vinyl record finishes.
Source
Selects the modulation source for the click noise level.
Amount
Sets the modulation amount of the click noise level.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
Wave Shape Tables
Sine
Wet / Dry
10 Cycle
Wet / Dry
20 Cycle
[Off...Tempo]
[Off...Tempo]
2 Cycle
Frequency3
Cocoon
Double Sine
Attack Up
Symmetry
[0...100]
[0...100]
[0...100]
[+/–100]
[0...100]
[+/–100]
Frequency7
Phase
Frequency8
Advertisement
Table of Contents
