Table of Contents
Advertisement
v 5–1: Page Menu Commands
• Compare →p.112
• Write Program →p.112
• Exclusive Solo →p.113
• Copy Step Sequencer →p.140
• PAGE →p.126
• MODE →p.126
5–2: Common LFO
This is a single, free-running LFO, global for all voices in
the Program–like the modulation LFOs in some vintage
analog synths. It's always available as a modulation source
for both EXi1 and EXi2, regardless of which EXi
instruments are being used.
5–3: Common Keyboard Track
The Program includes two Common keyboard tracking
generators, in addition to any keyboard tracking within the
individual EXi instruments. You can use these Common
keytracks as AMS sources for modulating most AMS
destinations.
EXi PROGRAM > EQ
This page is very simple, but very useful: it lets you control
the Program's EQ settings. This is the same as with HD-1
programs. For more information, see "4–9: EQ" on page 82.
EXi PROGRAM > IFX
This pages let you control the Program's twelve Insert
Effects (IFX). This is the same as with HD-1 programs. For
more information, see "PROGRAM > IFX" on page 98.
EXi PROGRAM > MFX/TFX
This pages let you control the Program's two Master Effects
(MFX) and two Total Effects (TFX). This is the same as with
HD-1 programs. For more information, see "PROGRAM >
MFX/TFX" on page 107.
EXi PROGRAM > Modulation 5–2: Common LFO
This is the same as with HD-1 programs. For more
information, see "5–9: Common LFO" on page 87.
The Common Key Track parameters are shared by the entire
Program, but the actual AMS values are calculated
individually for each voice.
This is the same as with HD-1 programs. For more
information, see "6–9: Common KeyTrack" on page 96.
139
Advertisement
Table of Contents
