Table of Contents
Advertisement
MEDIA mode
Also when using Save PCG or Save Sampling Data to
save an individual program, drum kit, or multisample or
sample created in SAMPLING mode, we recommend
that you save the data in the same directory with the same
filename.
When using Load PCG to load a .PCG file, the .KSC file
of the same name will be loaded at the same time so that
the multisamples/samples that were saved with the
program or drum kit will correspond correctly.
If the data being saved does not fit on one
volume of media
When saving a .PCG, .KSC, .KMP, or .KSF file, and the data
does not fit on one volume of media, the display will ask
"No space available on medium. Do you want to make a
divided file?"
1. To save the data as a divided file across two or more
volumes of media, make sure that you have the
required number of discs, and then press the OK
button in the "No space available on medium" dialog
box. Saving will begin.
If you decide that you don't want to save a divided file,
press the Cancel button, and save your data to media that
has more available space.
2. When a volume of media fills up during the save, the
following dialog box will appear.
Insert the next volume of media and press the LCD screen
to make the NAUTILUS detect the media, or use "Drive
Select" (0–1a) to specify the save-destination media.
3. Press the Select button to continue saving. If the "No
space available on medium" dialog box appears again,
repeat steps 1–3.
Saving will be halted if you press the Cancel button. If
you then want to abort the save operation, press the OK
button in the dialog box.
If you press the Skip button, the indicated file will be
skipped, and the next file will be saved.
Save All (PCG, SNG and KSC)
Save All lets you save all of the internal data to disk in a
single step, including:
.PCG file: Programs, combinations, drum kits, Arpeggio
Pattern, wave sequences, global settings
718
.SNG file: Songs, region data
.KSC file: References to Multisamples, Samples, and Drum
Samples from SAMPLING mode, EXs, or User Sample
Banks
This command is valid only when the current directory is a
DOS directory. If you are browsing inside a .PCG, .SNG, or
.KSC file, for instance, the menu command will be grayed
out.
1. Select Save All to open the dialog box.
Save All (PCG, SNG and KSC)
2. Use the text edit button to open the text edit dialog
box, and set the name as desired.
The name will be shared by all of the saved files, each
with its own three-letter extension. For example, the
name "NewFile" will result in files named NewFile.PCG,
NewFile.SNG, and NewFile.KSC.
If a USB QWERTY keyboard (commercially available) is
connected, you can use this to enter text instead of the on-
screen keyboard. For more information, see "Editing
names and entering text" on page 202 of the OG.
3. Select the bank(s) that you want to save.
Programs, combinations, drum kits, wave sequences, and
Arpeggio Pattern can be saved in units of banks.
Information on the bank to be saved is displayed below
each Selection button. Banks that are checked will be
saved.
If you want to modify the selections, press the Selection
button to open the dialog box, and check the check boxes
for the data you want to save.
Example: when the Selection button for Program is pressed
If you press the All button, all banks will be checked.
If you press the Nothing button, all banks will be
unchecked.
Press the OK button to change the selections as specified,
or press the Cancel button to discard your changes.
To specify whether "Global Settings" will be saved, use
the check box in step 1.
4. To save the data, press the OK button. To cancel
without saving, press the Cancel button.
Advertisement
Table of Contents
