053: Stereo Envelope Phaser - Korg NAUTILUS Series Parameter Manual

Hide thumbs Also See for NAUTILUS Series:
Table of Contents

Advertisement

053: Stereo Envelope Phaser

Stereo In - Stereo Out
Left
Right
D-mod
D
-mod
EG Attack/Decay
EG
This stereo phaser uses an envelope generator for
modulation. You will obtain the same pattern of phasing
each time you play. You can also control the Phaser directly
using the modulation source.
PHASER
L Manual Bottom
Sets the lower limit of the left-channel phaser's sweep.
For more information on the Bottom and Top settings, see
the graphic under "Frequency Bottom" on page 779.
L Manual Top
Sets the upper limit of the left-channel phaser's sweep.
R Manual Bottom
Sets the lower limit of the right-channel phaser's sweep.
R Manual Top
Sets the upper limit of the right-channel phaser's sweep.
CONTROL
Sweep Mode
Determines whether the phaser is controlled by the envelope
generator or by the modulation source. For more
information, see "Sweep Mode" on page 807.
Source
Selects the modulation source that triggers the EG (when EG
is selected for Sweep Mode), or modulation source that
causes the phaser to sweep (when Dmod is selected for
Sweep Mode). For more information, see "Source" on
page 807.
EG
Attack
Sets the EG attack time. For more information Attack and
Release, see the graphic under "Attack [msec]" on page 764.
Decay
Sets the EG decay time.
PHASER
Resonance
This controls the intensity of the phaser. For more
information, see "Resonance" on page 808.
810
Phaser
Resonance
High Damp
Phaser
Sweep Mode
[0...100]
[0...100]
[0...100]
[0...100]
[EG, Dmod]
[Off...Tempo]
[1...100]
[1...100]
[+/–100]
High Damp [%]
This sets the amount of high-frequency attenuation in the
Wet / Dry
phaser's feedback loop. Increasing the value will cut high-
range harmonics.
OUTPUT
Wet / Dry
Wet/Dry
Sets the balance between the "wet" processed sound and the
dry input. Negative values invert the phase of the wet signal.
This interacts with Resonance; for more information, see
"Resonance" on page 808.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
[0...100]
[–Wet...–1:99, Dry, 1: 99...Wet]
[Off...Tempo]
[+/–100]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nautilus-61

Table of Contents