056: Stereo Auto Fade Mod - Korg NAUTILUS Series Parameter Manual

056: Stereo Auto Fade Mod.

This stereo chorus/flanger effect enables you to control the
LFO speed and effect balance using auto fade, and you can
spread the sound by offsetting the phase of the left and right
LFOs from each other.
Stereo In - Stereo Out
Left
Delay
Delay
Right
LFO: Tri / Sine LFO Shape
AutoFade
AUTOFADE
For more information on the Autofade parameters, see
"AUTOFADE" on page 812.
Source
Selects the modulation source that starts AutoFade.
Rate
Sets the rate of fade-in.
Fade-In Delay [msec]
Sets the fade-in delay time.
LFO Frequency Mod
Switches between D-mod and AUTOFADE for the LFO
frequency modulation.
Wet/Dry Mod
Switches between D-mod and AUTOFADE for the effect
balance modulation.
MOD DELAY
L Delay Time [msec]
Sets the left channel delay time.
R Delay Time [msec]
Sets the right channel delay time.
Depth
Sets the depth of LFO modulation.
Feedback
Sets the feedback amount. See "Feedback" on page 800.
High Damp [%]
Sets the amount of high-frequency attenuation for the
feedback path.
LFO
Waveform
Selects the LFO Waveform.
Wet / Dry
Feedback
High Damp
Wet / Dry
LFO Phase
LFO Frequency
Wet / Dry
[Off...Tempo]
[1...100]
[00...2000]
[Dmod, AUTOFADE]
[Dmod, AUTOFADE]
[0.0...500.0]
[0.0...500.0]
[0...200]
[+/–100]
[0...100]
[Triangle, Sine]
Modulation and Pitch Shift 056: Stereo Auto Fade Mod.
Shape
Changes the curvature of the LFO Waveform. For more
information, see "Shape" on page 782.
Phase [degrees]
Sets the LFO phase difference between the left and right. See
"Phase [degrees]" on page 781.
Frequency [Hz]
This sets the LFO speed, in Hz.
Source
This selects a modulation source for the Frequency.
Amount
This sets the Frequency modulation amount, in Hz.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual LFO, or
one of the Common FX LFOs. For more information, see
"LFO Type" on page 779.
Common LFO Phase Offset [degrees]
When Type is set to Common FX LFO 1 or 2, this lets you
offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
[+/–100]
[–40...+40]
[0.02...20.00]
[Off...Tempo]
[–20.00...+20.00]
[+/–180]
813