073: Organ Vibrato/Chorus; 074: Rotary Speaker - Korg NAUTILUS Series Parameter Manual

073: Organ Vibrato/Chorus

This effect simulates the chorus and vibrato circuitry of a
vintage organ. The modulation speed and depth can be
customized.
This effect works the same as the Chorus/Vibrato included in
the CX-3. For more information, see "7–1c: Vibrato/Chorus"
on page 197.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Preset Setting
Custom Parameters
Right
CONTROL
Input Trim
Sets the input level.
Mode
Selects either preset or custom settings.
PRESET
Type
Selects the effect type when Mode=Preset.
V1/V2/V3 are variations of vibrato, and C1/C2/C3 are
variations of chorus.
Source
Selects the modulation source that will change the effect
type.
Amount
Sets the modulation amount for changing the effect type.

074: Rotary Speaker

This effect simulates a rotary speaker, and obtains a more
realistic sound by simulating the rotor in the low range and
the horn in the high range separately. The effect also
simulates the stereo microphone settings.
Rotary Speaker speed indicator
In PROGRAM, COMBINATION, SEQUENCER, and SET
LIST modes, if there is an active Rotary Speaker, its current
state (Fast, Slow, or Stop) is shown at the top of the display.
This includes both CX-3 Programs and any Rotary Speaker
effects. If there are two or more active Rotary Speakers, the
state of the fastest one is shown. For instance, if a
Combination has three CX-3 Programs, whose current states
are Fast, Slow, and Stop respectively, the menu bar will
show Fast.
828
Wet / Dry
Vibrato/Chorus
Mode
Wet / Dry
[0...100]
[Preset, Custom]
[V1, C1, V2, C2, V3, C3]
[Off...Tempo]
[–5...+5]
CUSTOM
Mix
Sets the mix level of the direct sound when Mode=Preset.
Source
Selects the modulation source that will control the mix level
of the direct sound.
Amount
Sets the modulation amount for controlling the mix level of
the direct sound.
Depth
Sets the vibrato depth.
Source
Selects the modulation source that will control vibrato depth.
Amount
Sets the modulation amount for controlling the vibrato
depth.
Speed [Hz]
Sets the vibrato speed.
Source
Selects the modulation source for controlling the vibrato
speed.
Amount
Sets the modulation amount for controlling the vibrato
speed.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Rotor
Right
D -mod
Mode Switch: Rotate/Stop
D -mod
Speed Switch: Slow/Fast
D -mod
Manual Speed Control
CONTROL
Mode Switch
Switches between speaker rotation and stop.
Source
Selects a modulation source for Rotate/Stop.
[0...100]
[Off...Tempo]
[+/–100]
[0...100]
[Off...Tempo]
[+/–100]
[0.02...20.00]
[Off...Tempo]
[–20.00...+20.00]
Wet / Dry
Mic Distance
Horn/Rotor
Mic Spread
Balance
Speaker Simulation
Wet / Dry
[Rotate, Stop]
[Off...Tempo]