Table of Contents
Advertisement
EXi: EP-1 MDS Electric Piano
Insert Effects
The parameters vary depending on the selected effect.
Small Phase
This classic phaser, made in New York City during the 70s,
has a notably warm and rich tone with liquid transparency.
Speed [Hz]
This controls the speed of the phaser's LFO. The default is
0.56 Hz.
Source
This selects a mod source to control the Speed. For a list of
Dmod sources, see the "Dynamic Modulation Source List"
on page 910.
Amount
This controls the depth and direction of the Speed
modulation.
Color
This changes the sound of the phaser between a full and
round phase shift when set to Off, and a more pronounced
effect when set to On.
OUTPUT
Wet/Dry
Sets the balance between the "wet" processed sound and the
dry input.
Source
This selects a modulation source to control the Wet/Dry
balance.
Amount
This controls the depth and direction of the Wet/Dry
modulation.
Orange Phase
This phaser pedal is a favorite on many recordings. It's
useful for adding sparkle, animating chord passages, and
widening and fattening the sound.
The original had only a speed control; this version adds
depth, control of the center frequency, and more.
Speed [Hz]
This controls the speed of the phaser's LFO. The default is
1.00 Hz.
Source
This selects a modulation source to control the Speed. For a
list of Dmod sources, see the "Dynamic Modulation Source
List" on page 910.
Amount
This controls the depth and direction of the Speed
modulation.
Depth
Sets the depth of LFO modulation.
370
[0.10...10.00]
[List of Dmod Sources]
[–10.0...+10.0]
[Off, On]
[Dry, 1:99...99:1, Wet]
[List of Dmod Sources]
[–100...+100]
[0.10...10.00]
[List of Dmod Sources]
[–10.0...+10.0]
[0...100]
Source
This selects a modulation source to control the LFO
modulation Depth.
Amount
This controls the depth and direction of the Depth
modulation.
Resonance
This controls the intensity of the phaser effect. The default is
26. Mixing the processed and dry signals via Wet/Dry will
enhance the effect.
Manual
This sets the center frequency of the phaser. The default is
45.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 370.
Black Phase
Inspired by a classic European phaser pedal.
Speed [Hz]
This controls the speed of the phaser's LFO. The default is
1.0Hz.
Source
This selects a modulation source to control the Speed. For a
list of Dmod sources, see the "Dynamic Modulation Source
List" on page 910.
Amount
This controls the depth and direction of the Speed
modulation.
Depth
Sets the depth of LFO modulation.
Source
This selects a modulation source to control the LFO
modulation Depth.
Amount
This controls the depth and direction of the Depth
modulation.
Resonance
This controls the intensity of the phaser effect. The default is
26. Mixing the processed and dry signals via Wet/Dry will
enhance the effect.
Manual
This sets the center frequency of the phaser. The default is
45.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 370.
[List of Dmod Sources]
[–100...+100]
[000...100]
[1...100]
[0.10...10.00]
[List of Dmod Sources]
[–10.0...+10.0]
[0...100]
[List of Dmod Sources]
[–100...+100]
[000...100]
[1...100]
Advertisement
Table of Contents
