022: St. Env. Flanger (Stereo Envelope Flanger); 023: Stereo Phaser - Korg Triton Studio Parameter Manual

022: St. Env. Flanger
(Stereo Envelope Flanger)
This Flanger uses an envelope generator for modulation. You
will obtain the same pattern of flanging each time you play.
You can also control the Flanger directly using the modula-
tion source.
Stereo In - Stereo Out
Left
Flanger
Flanger
Right
D-mod
D -mod
Sweep Mode
EG Attack/Decay
EG
L Dly Bottom [msec] (L Delay Bottom)
Sets the lower limit of the delay time on the left channel
a
L Dly Top [msec] (L Delay Top)
Sets the upper limit of the delay time on the left channel
R Dly Bottom [msec] (R Delay Bottom)
Sets the lower limit of the delay time on the right channel
b
R Dly Top [msec] (R Delay Top)
Sets the upper limit of the delay time on the right channel
Sweep Mode
Determines whether the flanger is controlled by the envelope gener-
ator or by the modulation source
c
Src
Selects the modulation source that triggers the EG (when EG is
selected for Sweep Mode), or modulation source that causes the
flanger to sweep (when D-mod is selected for Sweep Mode)
EG Attack
Sets the EG attack speed
d
EG Decay
Sets the EG decay speed
Feedback
e
Sets the feedback amount
High Damp [%]
f
Sets the feedback damping amount in the high range
Wet/Dry
Sets the balance between the effect and dry sounds
g Src
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
c: Sweep Mode, c: Src
This parameter switches the flanger control mode. With "Sweep
Mode" = EG, the flanger will sweep using the envelope generator.
This envelope generator is included in the envelope flanger, and
not related to the Pitch EG, Filter EG, or Amp EG.
The "Src" parameter selects the source that starts the envelope
generator. If you select, for example, Gate, the envelope generator
will start when the note-on message is received.
When "Sweep Mode" = D-mod, the modulation source can con-
trol the flanger directly. Select the modulation source using the
"Src" parameter.
The effect is off when a value for the modulation source
specified for the "Src" parameter is smaller than 64, and the
effect is on when the value is 64 or higher. The Envelope
Generator is triggered when the value changes from 63 or
smaller to 64 or higher.
d: EG Attack, d: EG Decay
Attack and Decay speed are the only adjustable parameters on
this EG.
Wet / Dry
Feedback
High Damp
Wet / Dry
0.0...50.0msec
Fx:009
0.0...50.0msec
Fx:009
0.0...50.0msec
Fx:009
0.0...50.0msec
Fx:009
EG, D-mod
,
Off...Tempo
1...100
1...100
–100...+100
Fx:020
0...100%
Fx:020
–Wet...–1:99, Dry, 1:99...Wet
010, 020,
Off...Tempo
–100...+100

023: Stereo Phaser

This effect creates a swell by shifting the phase. It is very
effective on electric piano sounds. You can add spread to the
sound by offsetting the phase of the left and right LFOs from
each other.
Stereo In - Stereo Out
Left
Phaser
Phaser
Right
LFO Phase
LFO: Tri / Sine LFO Shape
LFO Waveform
Selects LFO Waveform
a
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
b
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Manual
e
Sets the frequency to which the effect is applied
Depth
Sets the depth of LFO modulation
Src
f
Selects the modulation source for the LFO modulation depth
Amt
Sets the modulation amount of the LFO modulation depth
Resonance
Sets the resonance amount
g
High Damp [%]
Sets the resonance damping amount in the high range
Wet/Dry
Sets the balance between the effect and dry sounds
h Src
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
g: Resonance, h: Wet/Dry
The peak shape of the positive and negative Feedback value is dif-
ferent. The harmonics will be emphasized when the effect sound
is mixed with the dry sound, if you set a positive value for both
"Resonance" and "Wet/Dry", and if you set a negative value for
both "Resonance" and "Wet/Dry".
g: High Damp [%]
This parameter sets the amount of damping of the resonance in
the high range. Increasing the value will cut high-range harmon-
ics.
Wet / Dry
Resonance
High Damp
Wet / Dry
Triangle, Sine
–100...+100
Fx:020
–180...+180
Fx:010
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
x1...x16
Fx:009
0...100
0...100
Off...Tempo
–100...+100
–100...+100
0...100%
–Wet...–1:99, Dry, 1:99...Wet
Fx:010,
Off...Tempo
–100...+100
199