Table of Contents
Advertisement
PROGRAM mode: HD-1
Key: Each note will sound with the velocity value at which
it was actually played.
Step: This is available when an user arpeggio pattern
U0000(INT)–U1027(USER)
this is selected, the velocity specified for each step will be
used.
The velocity can also be controlled by the arpeggio control
(ARP) VELOCITY knob. Rotating the knob toward the left
will decrease the velocity, and rotating it toward the right
will increase the velocity. When the knob is at the 12 o'clock
position, the velocity will be as specified here.
When a preload user arpeggio pattern is selected, setting the
Gate or Velocity to Step will add a sense of groove to the
arpeggio pattern.
Gate
Specifies the length (gate time) of each note in the arpeggio.
000–100(%): Each note will be played with the specified
gate time.
Step: This is available when a user arpeggio pattern
U0000(INT)–U1027(USER)
this is selected, the gate time specified for each step will be
used.
The gate time can also be controlled by the arpeggio control
(ARP) GATE knob. Rotating the knob toward the left will
shorten the gate time, and rotating it toward the right will
lengthen the gate time. When the knob is at the 12 o'clock
position, the gate time will be as specified here.
Keyboard
This specifies whether the notes you play on the keyboard
will be sounded as usual in addition to being sounded as part
of the arpeggio.
On (checked): The notes you play will be sounded on their
own, in addition to being sounded as part of the arpeggio.
For example if you simultaneously press two or more notes,
they will be sounded as usual in addition to being played as
arpeggiated notes.
Off (unchecked): Only the arpeggiated notes will be heard.
Note:
You can use the menu command Copy Arpeggiator to
copy arpeggiator settings from another program or
combination (see page 66).
DRUM Pattern Setup:
Sync
To sync the playback of the drum track and arpeggiator (or
sequencer), set "Sync" to "On".
(Trigger Sync) On: The drum track will start with the
trigger that starts the drum track falling in sync with the
nearest beat played by the arpeggiator that is currently
running. In SEQUENCER mode, the drum track pattern will
start with the trigger falling in sync with the beginning of the
nearest measure of the song, pattern or RPPR that's currently
playing.
Note: In SEQUENCER mode, when synchronizing the
RPPR pattern to the drum track that is currently playing, set
the "Sync" parameter to "Beat" or "Measure".
(Trigger Sync) Off: When the "Trigger Mode" parameter is
set to "Start Immediately", the drum track pattern starts at
the same time that the DRUM function is turned on. Also,
when this parameter is set to "Wait KBD Trig", the pattern
20
is selected for Pattern. When
[000...100(%), Step]
is selected for Pattern. When
[Off, On]
[Off, On]
starts right when you press a key. Note that when "Sync" is
set to "Off", the drum track pattern will not synchronize with
the arpeggiator that is currently playing; and in
SEQUENCER mode, the drum track pattern will not
synchronize with the RPPR.
Shift
Sets the drum pattern in semitones. This will change the
instruments used in the drum kit.
Edit STEP SEQUENCE
This is used to edit the step sequencer's sequence.
The step sequencer features four sequences (A, B, C and D),
and you can select and play one sequence for each scene.
Load Arpeggio Pattern
Loads the arpeggio pattern as a step sequence.
Note: Since any parameter settings that are not in the step
sequence will be lost, the pattern will not be exactly the same
when played back.
All Clear
Initializes the step sequencer.
Step Edit
This let you input phrases and set the tempo, beat and phrase
length.
Meter
Sets the beat (time signature) used by the step sequence.
Length
Sets the length of the step sequence.
Resolution
Sets the resolution of the step sequence.
Accent
This lets you change the amount of accent applied to steps
that are set to be accented.
Values from +01 to +63 will increase the velocity of the
steps whose accent is turned on.
Values from -01 to -64 will decrease the velocity of the steps
whose accent is turned on.
Steps Per Beat (for Swing)
Sets the steps that will swing. Set the amount of swing using
the "Swing" parameter of the RT Control Knob (0–6c).
x1: Swing will be applied to even-numbered steps (2, 4, 6,
8...).
x2: Swing will be applied to steps 3, 7, 11, 15 and numbers
following this pattern.
x4: Swing will be applied to steps 5, 13, 21, 29 and numbers
following this pattern.
[–24...+00...+24]
[1/4~16/4.... 1/16...16/16]
[1...64]
[ 3 ... ]
[–64...+63]
Advertisement
Table of Contents
