029: Stereo Guitar Cabinet; 030: Guitar Amp Model +P4Eq - Korg NAUTILUS Series Parameter Manual

029: Stereo Guitar Cabinet

This simulates the acoustical character of a guitar amp's
speaker cabinet.
Stereo In - Stereo Out
Left
Trim
Trim
Right
CABINET SIMULATOR
Trim
Sets the input level.

030: Guitar Amp Model +P4EQ

This combines a guitar amp simulation (which even
faithfully replicates the distortion and tone control circuitry)
with a four-band equalizer.
For a description of the EQ graphic, see "011: Stereo
Parametric 4EQ" on page 774.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Guitar Amp Model
Right
D -mod
GUITAR AMP MODEL
Type [AC15, AC15TB, AC30, AC30TB, UK BLUES,
UK 70'S, UK 80'S, UK 90'S, UK MODERN, US MODERN,
US HIGAIN, BOUTIQUE OD, BOUTIQUE CL, BLACK
Selects the type of the amplifier. For more information, see
"Type" on page 793.
Gain
Sets the input gain.
Volume
Sets the output level.
Source
Selects the modulation source for the output level.
Amount
Sets the modulation amount of the output level.
Bass
Sets the bass (low range) level.
792
Cabinet Simulator
Cabinet Simulator
[0...100]
Volume
Parametric 4Band EQ
2x12, TWEED 1x12, TWEED 4x10]
[0...100]
[0...100]
[Off...Tempo]
[+/–100]
[0...100]
Type [TWEED 1x12, TWEED 4x10, BLACK 2x10,
Selects the type of the cabinet. See "031: Guitar Amp Model
Wet / Dry +Cabinet" on page 793.
Air
Sets the mic position.
OUTPUT
Wet / Dry
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
Middle
Sets the middle (mid range) level.
Treble
Sets the treble (high range) level.
Cut / Presence
This controls the high-frequency tone.
Wet / Dry
If the Type is AC15...AC30TB, the Cut (high frequency
attenuation) parameter is available. For other Type settings,
the Presence (high frequency boost) parameter is available.
PARAMETRIC EQ
Wet / Dry
Band1 Fc [Hz]
Sets the center frequency of Band 1.
Q
Sets Band 1's bandwidth.
Gain [dB]
Sets the gain of Band 1.
Band2 Fc [Hz]
Sets the center frequency of Band 2.
Q
Sets Band 2's bandwidth.
Gain [dB]
Sets the gain of Band 2.
Band3 Fc [Hz]
Sets the center frequency of Band 3.
Q
Sets Band 3's bandwidth.
Gain [dB]
Sets the gain of Band 3.
BLACK 2x12, AC15, AC30, AD412,
UK H30, UK T75, US V30]
[20...1.00k]
[0.5...10.0]
[–18...+18]
[50...5.00k]
[0.5...10.0]
[–18...+18]
[300...10.00k]
[0.5...10.0]
[–18...+18]
[0...100]
[0...100]
[0...100]
[0...100]