Table of Contents
Advertisement
PROGRAM mode: HD-1
Times
This multiplies the length of the Base Note. For instance, if
the Base Note is set to a sixteenth note, and Times is set to 3,
the LFO will cycle over a dotted eighth note.
5–2: OSC1 LFO2
This is Oscillator 1's second LFO. Its parameters are exactly
the same as those for the first LFO, as described under "5–1:
OSC1 LFO1" on page 83–except that LFO1 cannot
modulate LFO2.
5–5: OSC2 LFO1
This page controls Oscillator 2's first LFO. It is available
only when the Oscillator Mode is set to Double; if not, the
page will be grayed out.
5–6: OSC2 LFO2
This page controls Oscillator 2's second LFO. It is available
only when the Oscillator Mode is set to Double; if not, the
page will be grayed out.
Its parameters are exactly the same as those for the first
LFO, as described under "5–1: OSC1 LFO1" on page 83–
except that LFO1 cannot modulate LFO2.
86
[01...32]
v 5–1: Page Menu Commands
• Compare →p.112
• Write Program →p.112
• Exclusive Solo →p.113
• Swap LFO 1&2 →p.121
• PAGE →p.126
• MODE →p.126
The parameters are identical to those for Oscillator 1, as
described under "5–1: OSC1 LFO1" on page 83.
Advertisement
Table of Contents
