Sequencer > Mfx/Tfx; 9-1: Routing - Korg NAUTILUS Series Parameter Manual

Hide thumbs Also See for NAUTILUS Series:

Table of Contents

SEQUENCER mode

SEQUENCER > MFX/TFX

Here you can make settings for the master effects and total

effects. For more information, please see "Effect Guide" on

9–1: Routing

Here you can specify the type of master effects and total

effects, and turn them on/off. The meters below the effects

names display the effect output levels in realtime, showing

the combined peak signals of the left and right channels.

The master effects are sent to the L/R bus. The total effects

are inserted into the L/R bus.

These parameters are the same as in PROGRAM mode. For

more information, please see "9–1: Routing" on page 107.

9–1a: MFX1, 2

Chain On/Off

Chain Direction

[MFX1→MFX2, MFX2→MFX1]

9–1b: TFX1, 2

9–1c: Master Volume

Master Volume

v 9–1: Page Menu Commands

• Compare →p.112

• Memory Status →p.521

• Exclusive Solo →p.113

• Copy MFX/TFX →p.125

• Swap MFX/TFX →p.125

• Put Effect Setting to Track →p.554

• FF/REW Speed →p.523

• Set Location (for Locate Key) →p.523

• PAGE →p.126

• MODE →p.126