Table of Contents
Advertisement
Reed EP
5–1a
5–1i
5–1j
5–1c
These parameters apply when the EP Model Type is set to
either Reed 200 or Reed 200a.
5–1i: Pre-amp
VOLUME
This controls the volume level. The default is 8.0.
AMS
This selects an AMS source to control the VOLUME. For a
list of AMS sources, see "Alternate Modulation Source
(AMS) List" on page 901.
Intensity
This controls the depth and direction of the VOLUME AMS
modulation.
5–1j: Vibrato
INTENSITY
This controls the depth of the vibrato effect. To turn off the
vibrato completely, set INTENSITY to 00.0. (The original
instrument had only a knob, without a separate on/off
switch.)
AMS
This selects an AMS source to control the INTENSITY. For
a list of AMS sources, see "Alternate Modulation Source
(AMS) List" on page 901.
Intensity
This controls the depth and direction of the INTENSITY
AMS modulation.
SPEED
This controls the rate of the vibrato effect. On the original
instrument, SPEED wasn't adjustable; 5.0 on this knob
matches the original value.
[00.0...10.0]
[List of AMS Sources]
[–10.0...+10.0]
[00.0...10.0]
[List of AMS Sources]
[–10.0...+10.0]
[00.0...10.0]
EXi PROGRAM > EP-1: Panel/IFX/Amp Reed EP
AMS
This selects an AMS source to control the SPEED. For a list
of AMS sources, see "Alternate Modulation Source (AMS)
List" on page 901.
Intensity
This controls the depth and direction of the SPEED AMS
modulation.
5–1k: Amp & Cabinet
This section is the same as for the Tine Piano, as described
under "5–1h: Amp & Cabinet" on page 368.
5–1PMC
5–1b
5–1h
5–1d
[List of AMS Sources]
[–10.0...+10.0]
369
Advertisement
Table of Contents
